LU1508 Juki

FEATURE


A new feed mechanism with a rectangular feeding motion prevents stitch gathering.


  • The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering.
  • The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.


The alternating vertical movement mechanism prevents irregular stitches.

 

  • The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes.

 

  • Even when a heavy material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches.

 

  • The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of material.
  • Total presser foot height by knee is 16mm or 5/8".

 

 

The highly efficient vertical-axis double-capacity hook is equipped as standard.
  • With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.
The machine comes with a dual-tension mechanism.
LU-1508NS
  • The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.